T-WORKS Concrete Hydraulic Jack In Piling Machine / Pile Foundation Equipment
1. Description:
Hydraulic Static Pile Drivers are featured with no noise, no vibration, no pollution and no rubbish left in construction site.It can work with H-piles, precast concrete and steel piles with different shapes,like round,square and tapered shape. There are series models range from 80T to 1200T
It is adopted the hydraulic system design of large power and high flow,the precast pile entirely depends on the hydraulic static pressure so that the pile can be pressed into the ground steadily and quietly.
The pressing-pile speed amounting to 300-800 meters within 8hours, which its quite more efficient than other conventional pile drivers.
This unique construction method with non-pollution has gradually taken place of the pile hammer.
2. Applications:
- Clay, soft soil, sand layer, etc.
- Noise regulated urban area.
- Vibration regulated areas
3. Specifications:
| Parameter/Model | ZYC360 |
| Rate piling pressure(KN) | 3600 |
| Piling speed(m/min) | Fast | 7.1 |
| Low | 1.9 |
| Piling stroke(m) | 1.9 |
| Pace(m) | Longitudinal | 3.6 |
| Horizontal | 0.7 |
| Angle range(°) | 11 |
| Rise stroke(m) | 1.1 |
| Square pile(mm) | Max | 500 |
| Circle pile(mm) | Max | 600 |
| Side piling(mm) | 1250 |
| Corner piling space(mm) | 2500 |
| Lifting weight(t) | 12 |
| Pile hanging length(m) | 14 |
| Power(KW) | Piling | 74 |
| Lifting | 30 |
| Main dimension(m) | Work length | 12.7 |
| Work width | 7.1 |
| Transpot height | 3.15 |
| Total weight(t) | 360 |
4. Feature Advantage:
- An impact pile driver was traditionally used for side pilling and corner pilling on pile foundation treatment at the site of city reconstruction, close to river side or other obstacles. T-works ZYC series pile driver innovatively have the clamping device for side and corner pilling installed in one end of machine so that structurally avoid using the same mechanism to treat with both side pilling and corner pilling in minimum area
-
New pattern of hydraulic footstep type travel mechanism is composed of two technical innovations of swing compensation and auto-reposition device, extensively increasing the reliability of components and maneuver ability of structure and is greatly labor saving. With its impact structure the machine is easy to be assembled and disassembled. Its biggest detached piece can be loaded on a 40 OT trailer.
Multi-function:
>>Our products are multi-function static hydraulic pile drivers with embracing pile driving, top-pressing pile driving or both at the same time because they are well combined with each other.
>>Our products have bigger capacity of side piling and corner piling than those of other companies, and the power of side or corner piling reaches 60% of the middle piling.
>>Our pile drivers can work with a variety of piles, square piles or round piles or other shape of steel piles, no matter thin-walled round concrete piles or thick-walled ones.
