T-WORKS Factory Direct ZYC Series Hydraulic Piling Machine For Square and Spun Pile Foundation
1, Description:
Hydraulic Press In Pile Driver machine using it's own weight and counter weight is the pile method of precast piles buried in the ballast section. This method save steel and concrete, reduce the cost of the project, the strength grade of concrete can be reduced 1 ~ 2 grade, Compared with the hammer method can save about 40 percent of the reinforcement and construction of no noise, no vibration, no pollution.
2, Applications:
- Clay, soft soil, sand layer, etc.
- Noise regulated urban area.
- Vibration regulated areas where traditional methods may threaten the stability of existing structures.
3, Specifications:
| Technical Parameter For Hydraulic Static Pile Driver |
| Parameter / Type / Model | ZYC460 | ZYC600 | ZYC700 | ZYC800 | ZYC900 | ZYC1000 | ZYC1200 |
| Rated piling pressure(KN) | 4600 | 6000 | 7000 | 8000 | 9000 | 10000 | 12000 |
| Piling speed(m/min) | Fast | 8.50 | 7.00 | 7.00 | 7.20 | 7.20 | 7.20 | 6.00 |
| Low | 1.60 | 1.40 | 1.00 | 1.10 | 1.10 | 1.00 | 1.00 |
| Piling Stroke(m) | 1.90 | 1.90 | 1.90 | 1.90 | 1.90 | 1.90 | 1.90 |
| Pace(m) | Longitudinal | 3.60 | 3.60 | 3.60 | 3.60 | 3.60 | 3.60 | 3.60 |
| Horizontal | 0.70 | 0.70 | 0.70 | 0.70 | 0.70 | 0.70 | 0.60 |
| Angle range(°) | 11 | 11 | 11 | 11 | 11 | 11 | 11 |
| Rise stroke (m) | 1.1 | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 |
| Max square pile(mm) | max | □500 | □650 | □650 | □650 | □650 | □650 | □650 |
| Max cirle pile(mm) | max | ￠600 | ￠800 | Φ800 | ￠800 | Φ800 | Φ800 | Φ800 |
| Side piling space(mm) | 1250 | 1380 | 1380 | 2800 | 1400 | 1600 | 1600 |
| Cirle piling space(mm) | 2500 | 2800 | 2800 | 2800 | 2800 | 3200 | 3200 |
| Lifting weight(t) | 16 | 16 | 25 | 25 | 25 | 25 | 50 |
| Lifting pile's lengh(m) | 16 | 15 | 17 | 17 | 17 | 17 | 17 |
| Power(KW) | Piling | 111 | 111 | 111 | 141 | 141 | 165 | 165 |
| Lifting | 30 | 30 | 37 | 30 | 37 | 37 | 37 |
| Main dimension(m) | Lenth of work | 13.00 | 13.80 | 14.00 | 14.70 | 14.80 | 16 | 16.8 |
| Width of work | 7.40 | 8.12 | 8.30 | 8.52 | 8.42 | 8.90 | 9.20 |
Transprorting
height | 3.25 | 3.30 | 3.30 | 3.30 | 3.40 | 3.40 | 3.40 |
| Total weight(T)≥ | 460 | 600 | 700 | 800 | 900 | 1000 | 1200 |
4, Basic Structure Of Hydraulic Press In Pile Driver
